Главная › Блог › Описание марок › Грузовые › HD PACCAR

Программа для диагностики и обслуживания грузовых автомобилей с двигателем PACCAR

PACCAR Diagnose Software V11.41

Обновления

Optimized Function:

  • Optimized Trouble Code For PACCAR.
  • Optimized Data Stream For PACCAR.

    Описание программного обеспечения

    Basic Functions

    • Read computer information
    • Read fault information
    • Clear fault information
    • Read running data

    Special Functions

    • Regenerate the DPF
    • Activate the air shutoff valve
    • Activate the BPV actuator
    • Activate the DEF inlet pipe heater
    • Activate the DEF pipe heaters
    • Activate the DEF pump heater
    • Activate the DEF return pipe heater
    • Activate the DEF reverting valve
    • Activate the DEF tank heater valve
    • Activate the electronically controlled fan clutch
    • Activate the ether start valve
    • Activate the fuel dosing valve
    • Activate the Malfunction Indicator Lamp
    • Activate the mobile regeneration trigger
    • Activate the MX Engine Brake
    • Activate the red engine warning
    • Activate the yellow engine warning
    • Assess the MX Engine Brake
    • Calibrate the accelerator pedal
    • Calibrate the oil level sensor
    • Change the Injector codes
    • Change the pump unit codes
    • Check delivery fuel dosing valve
    • Check leakage fuel dosing valve
    • Check oil level
    • Check the cylinder compression
    • Check the DEF pump module pressure and DEF output
    • Check the engine number
    • Check the fuel shutoff valve
    • Check the injection system during cranking
    • Check the internal DEF pump module
    • Check the particulate matter sensor
    • Cut-out the injectors
    • Diagnose the turbo actuator
    • Disable the DEF derate
    • Enable or disable the engine idle shutdown timer
    • Enable regeneration after aftertreatment system repair
    • Evaluate the coolant pump
    • Evaluate the injector back leakage
    • Evaluate the NOx sensor after catalyst
    • Evaluate the NOx sensor before catalyst
    • Evaluate the pump unit performance
    • Evaluate the turbo actuator functionality
    • Initialize the BPV
    • Install a cleaned DPF
    • Install a new DPF
    • Install and calibrate the VTG turbocharger actuator
    • Prime the system with the DEF pump
    • Read CAL-ID and CVN
    • Reset the common rail pressure release valve
    • Reset the DEF purge counter
    • Reset the soot level
    • Test the cylinder performance automatically
    • Test the EGR and turbo condition
    • Validate the accelerator pedal